- Home
- >
- Resources
- >
- Knowledge base
- >
- Installing Tape Guides in Your Bronco Max
Resource Navigation
Installing Tape Guides in Your Bronco Max
17
January,
2024
Getting Started
To install any DuraLabel tape guide, first load the desired supply and feed it through the printer. This example uses a 3/16 inch shrink tube supply.
How to Install Tape Guides
- While pulling the supply tight, orient that tape guide so it?s face-down on the printer supply path and the finger part is on the left side.
- Lock the tape guide onto the printer supply guide by sliding it forward.
- Squeeze the printer supply guides together, so the tape guide fits securely in place.
- Make sure the loaded supply fully covers the sensor.
More Support Options
If you need further assistance or have any other questions about DuraLabel tape guides, please contact DuraLabel by calling 800-788-5572 or visiting DuraLabel.com.
RELATED RESOURCES
Install Small Supplies in DuraLabel Toro Max
Overview If the size of the supply loaded is too small, it may not be able to hit the sensor consistently. To ...
Watch NowInstall Tape Guides in DuraLabel PRO
Overview Tape guides are required for ?" label supply and shrink tube sizes ?" and smaller. Larger vinyl and ...
Watch NowGet Started with DuraLabel Catalyst
Overview Administrator rights may be necessary to install a printer and/or print driver on your system. If ...
Watch Now